Python에서 Tenacity를 사용하여 함수 재시도하기

지수적 백오프

from tenacity import retry, wait_exponential

# Decorate the function with a retry mechanism
@retry(wait=wait_exponential(multiplier=1, min=1, max=10))
def my_function():
    # Your code logic here
    pass

# Explanation:
# - `multiplier`: Used to increase the interval between retries.
# - `min`: Minimum wait time in seconds between retries.
# - `max`: Maximum wait time allowed between retries.

from tenacity import retry, wait_exponential

# Decorate the function with a retry mechanism
@retry(wait=wait_exponential(multiplier=1, min=1, max=10))
def my_function():
    # Your code logic here
    pass

# Explanation:
# - `multiplier`: Used to increase the interval between retries.
# - `min`: Minimum wait time in seconds between retries.
# - `max`: Maximum wait time allowed between retries.

랜덤 지터

from tenacity import retry, wait_random

@retry(wait=wait_random(min=1, max=10))
def my_function():
    # Your code logic here
    pass

# Explanation:
# - `min`: Minimum random wait time in seconds between retries.
# - `max`: Maximum random wait time in seconds between retries.

from tenacity import retry, wait_random

@retry(wait=wait_random(min=1, max=10))
def my_function():
    # Your code logic here
    pass

# Explanation:
# - `min`: Minimum random wait time in seconds between retries.
# - `max`: Maximum random wait time in seconds between retries.

재시도 조건 사용자 지정

from tenacity import retry, retry_if_exception_type

# Retry on specific exceptions like ConnectionError
@retry(retry=retry_if_exception_type(ConnectionError))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Retry only if a ConnectionError exception is raised during the function execution.

from tenacity import retry, retry_if_exception_type

# Retry on specific exceptions like ConnectionError
@retry(retry=retry_if_exception_type(ConnectionError))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Retry only if a ConnectionError exception is raised during the function execution.

반환 값에 따라 재시도

from tenacity import retry, retry_if_result

@retry(retry=retry_if_result(lambda result: result is None))
def my_function():
    # Your code logic here
    return some_result

# Explanation:
# Retry if the function result is `None`.

from tenacity import retry, retry_if_result

@retry(retry=retry_if_result(lambda result: result is None))
def my_function():
    # Your code logic here
    return some_result

# Explanation:
# Retry if the function result is `None`.

정지 조건

from tenacity import retry, stop_after_delay

@retry(stop=stop_after_delay(30))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Stop retrying after 30 seconds have elapsed since the first attempt.

from tenacity import retry, stop_after_delay

@retry(stop=stop_after_delay(30))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Stop retrying after 30 seconds have elapsed since the first attempt.

재시도 콜백

from tenacity import retry, after_log
import logging

logger = logging.getLogger(__name__)

@retry(after=after_log(logger, logging.DEBUG))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Use a logger to log details of each retry attempt at the DEBUG level.

from tenacity import retry, after_log
import logging

logger = logging.getLogger(__name__)

@retry(after=after_log(logger, logging.DEBUG))
def my_function():
    # Your code logic here
    pass

# Explanation:
# Use a logger to log details of each retry attempt at the DEBUG level.

IronPDF 란 무엇인가요?

라이브러리 설치

Python 애플리케이션에서 Tenacity와 IronPDF 함께 사용하려면 필요한 종속성을 설치하고 두 라이브러리를 PDF 생성 워크플로에 통합하는 것이 첫 번째 단계입니다.

pip install tenacity
pip install ironpdf

pip install tenacity
pip install ironpdf

Python 스크립트에서 Tenacity와 IronPDF 에 필요한 모듈을 가져오세요.

from tenacity import retry, stop_after_attempt, wait_fixed
from IronPdf import IronPdf

# Set up retry behavior on the PDF generating function
@retry(
    stop=stop_after_attempt(3),   # Stop retrying after 3 attempts
    wait=wait_fixed(2)            # Wait 2 seconds between retry attempts
)
def generate_pdf(html_content):
    iron_pdf = IronPdf()
    # Render the HTML content as a PDF
    iron_pdf.render_html_as_pdf(html_content)
    # Save the generated PDF to a file
    iron_pdf.save_as_pdf("output.pdf")

# Explanation:
# - `@retry(stop=stop_after_attempt(3))`: Stop after 3 failed attempts.
# - `wait_fixed(2)`: Wait 2 seconds before each retry attempt.

from tenacity import retry, stop_after_attempt, wait_fixed
from IronPdf import IronPdf

# Set up retry behavior on the PDF generating function
@retry(
    stop=stop_after_attempt(3),   # Stop retrying after 3 attempts
    wait=wait_fixed(2)            # Wait 2 seconds between retry attempts
)
def generate_pdf(html_content):
    iron_pdf = IronPdf()
    # Render the HTML content as a PDF
    iron_pdf.render_html_as_pdf(html_content)
    # Save the generated PDF to a file
    iron_pdf.save_as_pdf("output.pdf")

# Explanation:
# - `@retry(stop=stop_after_attempt(3))`: Stop after 3 failed attempts.
# - `wait_fixed(2)`: Wait 2 seconds before each retry attempt.

PDF를 생성하는 함수를 호출하고 해당 함수에 HTML 텍스트를 전달하세요. Tenacity는 예외가 발생할 경우 미리 설정된 재시도 매개변수에 따라 해당 기능을 자동으로 재시도합니다.

try:
    html_content = "<html><body><h1>Hello, IronPDF!</h1></body></html>"
    generate_pdf(html_content)
    print("PDF generated successfully")
except Exception as e:
    print("Failed to generate PDF:", e)

# Explanation:
# Attempt to generate a PDF and handle any exceptions that might occur during the process.

try:
    html_content = "<html><body><h1>Hello, IronPDF!</h1></body></html>"
    generate_pdf(html_content)
    print("PDF generated successfully")
except Exception as e:
    print("Failed to generate PDF:", e)

# Explanation:
# Attempt to generate a PDF and handle any exceptions that might occur during the process.

재시도 횟수, 재시도 조건 및 대기 조건, 재시도 간격, 재시도가 발생해야 하는 상황과 같은 요소를 수정하여 재시도 동작을 더욱 다양하게 변경할 수 있습니다. Tenacity는 다양한 재시도 방법과 재시도 및 대기 조건 전략을 제공하므로 요구 사항에 따라 재시도 동작을 세밀하게 조정할 수 있습니다.

샘플 출력

다음은 위 코드의 실행 결과입니다.